Description

Vaporesso Luxe X3 45W Pod Vape Kit

The Vaporesso Luxe X3 is the third-generation Luxe X pod kit and the biggest battery upgrade the series has seen. A 2600mAh internal battery, Smart AXON chipset and 5W to 45W regulated output pair with a 0.8 inch digital display and an embedded LED light strip. The kit comes with two COREX dual-mesh pods (0.6 ohm pre-installed and a 0.4 ohm in the box) and stays cross-compatible with the wider Vaporesso Luxe pod platform, so existing older Luxe X dual-mesh and Luxe XR pods slot straight in.

Made by Vaporesso, the Luxe X3 is aimed at the vaper who wants longer days between charges, a screen that tells them something useful, and the freedom to pick MTL or restricted-DTL with a flick of the side-slider airflow.

It steps above the original Luxe X and Luxe X2 with a front-facing digital display the earlier generations never had, while wattage stays in step with the Luxe X family at 5W to 45W. COREX heating carries over, so the dual-mesh pods give the warmer, more saturated flavour the Luxe X dual-mesh tech is known for.

Compared to the larger Luxe XR Max 2, the X3 keeps the slimmer, pocket-shaped body at 107 by 31.4 by 22.8 mm and 100g, so it stays a true everyday carry rather than a sub-ohm crossover.

Key Features

• 2600mAh Battery largest in the Luxe X family, a full day for most vapers
• 5 to 45W Regulated Output covers MTL through to restricted-DTL
• Smart AXON Chipset auto pod recognition, child-lock and one-button mode switch
• 0.8-Inch Digital Display wattage, battery percentage, ohms and puff count
• 0.6 Ohm and 0.4 Ohm Pods Included COREX dual-mesh, nic salt and 50/50 ready
• Dual Activation Firing auto-draw or side button, switchable on the device
• Cross-Platform Pod Fit takes Luxe X dual-mesh and Luxe XR pods
• USB-C 2A Charging flat to full in 60 to 75 minutes

2600mAh Battery and USB-C Charging

The 2600mAh internal battery is the headline change versus the Luxe X2 (1000mAh) and original Luxe X (1500mAh). For a 20mg nic salt user vaping around 250 puffs a day, that lands in the all-day-and-then-some bracket, depending on resistance and wattage.

Charging is over USB Type-C at DC 5V/2A. A standard 2A wall adapter takes the Luxe X3 from empty to full in roughly 60 to 75 minutes. Pass-through means you can keep vaping while it charges.

Smart AXON Chipset and the 0.8 Inch Display

The Smart AXON chipset is the same firmware Vaporesso uses across the XROS, Armour and Luxe lines. It handles automatic pod recognition, child-lock, button-lock, and a single-button mode switch between MTL and DTL output curves.

The 0.8 inch front display shows wattage, real-time battery percentage, current pod resistance, and a puff count. An embedded LED light strip beside it gives a quick battery read at a glance, useful when the device is face-down on a desk.

0.6 Ohm and 0.4 Ohm Dual-Mesh Pods Included

Both pods that come in the kit use Vaporesso’s COREX heating technology with a dual-mesh coil structure. The 0.6 ohm pod is pre-installed and suits 10mg or 20mg nic salt for a tighter, cooler MTL draw. The 0.4 ohm pod is included for users who want a warmer, restricted-DTL hit and pairs well with 50/50 freebase liquids.

UK pods are 2ml TPD-compliant, refilled through a side-fill port. Spares are stocked on the dedicated older Luxe X dual-mesh pods page, and the older Luxe X dual-mesh pods still fit the X3.

Side-Slider Airflow and Dual Activation Firing

Airflow is set with a sliding control on the side of the device, moving from a tight MTL pull at the closed end to a more open restricted-DTL when fully open. The slider has firm detents, so it holds the position you set rather than drifting in a pocket.

Firing is dual activation: take a draw and it fires automatically, or press the side button on the inhale. Both modes can be locked independently using the AXON chipset, so accidental pocket firing is straightforward to rule out.

Cross-Platform Pod Compatibility

The Luxe X3 accepts three pod families: the COREX 2.0 dual-mesh pods that come in the kit, the older Luxe X dual-mesh pods (also listed on Ecigone), and the GTX-coil Luxe XR pods. The Luxe XR pods carry replaceable GTX coils, which opens up a wider resistance range than the integrated dual-mesh pods for vapers who want to experiment.

If your starting point is a different range entirely, the Luxe X3 is not compatible with Luxe Q pods (a separate platform). For wider context on which Vaporesso device takes which pod, the Luxe range has the full breakdown.

Vaporesso Luxe X3 Specifications

Battery	2600mAh internal
Output	5W to 45W regulated
Charging	USB Type-C, DC 5V/2A
Display	0.8 inch digital display with LED light strip
Chipset	Smart AXON
Pods in kit	0.6 ohm pre-installed, 0.4 ohm in box (COREX dual-mesh)
Pod capacity (UK)	2ml TPD compliant
Compatible pods	older Luxe X dual-mesh, Luxe X dual-mesh, Luxe XR (GTX-coil)
Airflow	Adjustable side slider, MTL to restricted-DTL
Activation	Dual: auto-draw or side button
Dimensions	107 x 31.4 x 22.8 mm
Weight	100g

What’s in the Box

• Vaporesso Luxe X3 device
• 0.6 ohm COREX dual-mesh pod pre-installed
• 0.4 ohm COREX dual-mesh pod
• USB-C charging cable
• User manual