Description
XROS COREX 2.0 Pods
The Vaporesso XROS COREX 2.0 pods are the original flat-mesh refillable pods made for the entire XROS kit family. Each pod holds 2ml of e-liquid, refills from the side through a silicone plug.
It also clicks onto any XROS device through the magnetic connection that has carried across the range since the original kit launched. The coil is pre-installed and the resistance is set at the point of order across five options.
From a tight 1.2 ohm MTL through to a 0.4 ohm restricted DL.
The 2.0 generation sits alongside the newer COREX 3.0 Hive Mesh pod on the same magnetic seat, so a 2.0 pod drops into the same XROS kit a 3.0 pod fits, with no extra adapter. The wider Vaporesso XROS pod kit range all takes this pod natively, from the original XROS through the XROS 4 series, XROS 5 family and XROS Pro 2. The COREX 2.0 sits inside Vaporesso’s broader refillable pod line-up as the original-mesh XROS option.
Each pack contains four pods. The 0.8 ohm is the most-picked option for nic salt users, the 0.6 ohm covers the loose MTL to light RDL crossover on 50/50. The 0.4 ohm leans toward restricted DL with 50/50 or thicker shortfill on the higher-wattage XROS kits.
Key Features
- Original Flat-Mesh Coil warmer denser body than newer Hive Mesh
- Five Resistance Options 0.4 ohm restricted DL through to 1.2 ohm tight MTL
- Side-Fill Silicone Plug hinged stopper on the side of the pod
- 2ml UK TPD-Compliant sealed pod capacity to UK regulation limit
- Full XROS Kit Fitment magnetic seat fits every XROS kit launched
- Four Pods Per Pack two to three weeks of daily use
Original Flat-Mesh Coil for Warmer Flavour
The COREX 2.0 pod uses Vaporesso’s flat mesh pattern, the coil generation the XROS platform launched on. The flat surface heats at a steady, even pace and pulls a denser, warmer vape with a fuller, rounder body.
Day-to-day that shows up as a fuller bottom-end on tobacco salts and a richer body on fruit menthols. This is why a steady base of XROS users still prefer the 2.0 once they have settled on a flavour they like.
Standard cotton wicking sits around the coil, saturating quickly during refill priming and holding e-liquid through a normal session. Weighing the two generations against each other? See the full COREX 2.0 vs COREX 3.0 breakdown on the COREX 3.0 pods page.
Five Resistance Options From RDL to Tight MTL
Each XROS COREX 2.0 pod has its coil pre-installed, so the resistance is fixed at the point of order. The resistance picked is what shapes the draw style and how the e-liquid wicks, the kit stays the same.
|
Resistance |
Draw style |
Wattage |
Best e-liquid |
|
0.4 ohm |
Restricted DL |
20-25W |
50/50 or 70/30 freebase, 3-6mg |
|
0.6 ohm |
Loose MTL or light RDL |
16-22W |
50/50 freebase or 10mg nic salts |
|
0.8 ohm |
Standard MTL |
12-18W |
10mg or 20mg nic salts |
|
1.0 ohm |
Tight MTL, cigarette-style |
11-14W |
20mg nic salts |
|
1.2 ohm |
Tightest MTL, longest pod life |
10-13W |
20mg nic salts |
The 1.0 ohm and 1.2 ohm pair best with 10mg or 20mg nic salts and give the longest refill life. The 0.8 ohm is the everyday cross-over for nic salt users on a standard XROS kit. The 0.6 ohm and 0.4 ohm reward 50/50 or 70/30 shortfill juice on the higher-wattage XROS 5 and XROS Pro 2 kits.
Compatible XROS Kits
Every kit in the Vaporesso XROS series uses the same magnetic pod connection, so the COREX 2.0 pod clicks into any XROS kit without an adapter. The current lineup all takes this 2.0 pod natively:
- Vaporesso XROS 4 Pod Kit
- Vaporesso XROS 4 Mini Pod Kit
- Vaporesso XROS 5 Pod Kit
- Vaporesso XROS 5 Mini Pod Kit
- Vaporesso XROS 5 Nano Pod Kit
- Vaporesso XROS Pro 2 Pod Kit
Legacy original XROS, XROS 2 and XROS 3 kits accept the COREX 2.0 pod too. Those older kits cap output at 16W to 18W, so the 0.6 ohm and above resistances suit them best. The 0.4 ohm will fire but will not reach its full wattage range on a legacy device.
Specifications
|
Spec |
Detail |
|
Brand |
Vaporesso |
|
Coil generation |
COREX 2.0 |
|
Coil structure |
Flat mesh |
|
Wicking |
Standard cotton |
|
Resistances |
0.4, 0.6, 0.8, 1.0, 1.2 ohm |
|
Pod capacity |
2ml UK TPD |
|
Fill method |
Side-fill silicone plug |
|
Connection |
Magnetic, XROS universal |
What’s in the Pack
- 4 x XROS COREX 2.0 Tech pods (resistance as selected)
- User leaflet





Reviews
There are no reviews yet.