Description

Elf Bar ELFX Refillable Pod Kit

The Elf Bar ELFX is a refillable pod kit built around dual mesh coil technology, a 1000mAh battery and up to 30W of output. It sits as the base anchor of the wider Elf Bar range and gives a clean step into refillable vaping from a prefilled Elf Bar 600 or similar bar. Auto-draw activation fires on inhale, with no buttons or screens to set up.

Two refillable ELFX dual mesh pods come in the pack, one at 0.6 ohm and one at 0.8 ohm. Each holds 2ml of e-liquid and tops up through a leak-proof top-fill port. Dual mesh coils last up to twice as long as a single mesh coil at the same wattage.

The ELFX pairs well with ELFLIQ nic salts on the 0.8 ohm MTL pod, or a 50/50 freebase on the 0.6 ohm RDL pod. Six colour finishes run across the range, all in aluminium alloy with a compact, lightweight feel.

Elf Bar ELFX Pod Vape Kit Key Features

• Dual Mesh Coil Technology – two heating elements per pod for longer coil life
• Two Resistance Pods Included – 0.6 ohm RDL and 0.8 ohm MTL in the pack
• 1000mAh Built-In Battery – up to 30W output, auto-adjusts to pod resistance
• Three-Level Adjustable Airflow – dial between tight MTL and open RDL on the base
• RGB Battery Indicator – five colour stages show charge level at a glance
• Top-Fill Leak Protection – four-layer anti-leak design across every pod
• Auto-Draw Activation – no buttons, no menus, inhale to fire

0.6 Ohm and 0.8 Ohm Pod Resistance Options

Both ELFX dual mesh pods come in the same 2ml top-fill body, with resistance the only difference. The 0.6 ohm pod sits in restricted direct-lung territory at around 25W for warmer vapour and more cloud. The 0.8 ohm pod runs closer to a tight MTL draw at around 17W, much closer to a cigarette pull.

Resistance	Style	Wattage
0.6 ohm	RDL	25W
0.8 ohm	MTL	17W

Dual Mesh Coil Technology

Dual mesh coils inside every ELFX pod heat e-liquid across a wider surface than single coil designs. Flavour stays rich and consistent from the first fill to the last, with less dry-burn and longer coil life. The dual mesh design also helps the pod handle higher wattages without sacrificing taste.

1000mAh Battery and USB-C Charging

A 1000mAh built-in battery sits behind regular daily use and tops up over USB-C at 5V/1A. Wattage adjusts automatically based on whichever pod resistance is installed, so there are no menus to learn or settings to tweak. An RGB LED on the front shows battery level across five colour stages, from green at full down to red when a charge is due.

RGB Battery Level Indicator

The five-stage RGB indicator on the front of the ELFX gives a clearer charge readout than a single LED. Green shows a full charge, shifting through yellow and orange as it drops. Red signals that charging is needed soon. The same LED also reacts during a draw, so the kit confirms each pull is firing.

Three-Level Adjustable Airflow

A three-level airflow ring sits at the base of the ELFX and controls draw tightness independently of which pod is fitted. Closing it down tightens the pull for a cigarette-style MTL draw with nic salts. Opening it up loosens the draw for a smoother RDL pull on freebase liquids.

The ELFX body blends aluminium alloy with PC material, keeping the kit lightweight without feeling cheap. Six colour finishes are available across the range: Silver, Grey, Black, Blue, Purple and Pink.

Elf Bar ELFX Specifications

Spec	Detail
Type	Refillable pod kit
Brand	Elf Bar
Battery	1000mAh rechargeable
Max Output	30W (auto-adjusts to pod)
Charging	USB-C 5V/1A
Pod Capacity	2ml refillable, top-fill
Coil	Dual mesh
Resistances	0.6 ohm RDL, 0.8 ohm MTL
Activation	Auto-draw (inhale)
Airflow	Three-level adjustable
Indicator	RGB LED (five stages)
Body	Aluminium alloy and PC
Colours	Silver, Grey, Black, Blue, Purple, Pink

How to Refill the ELFX Pod

• Pull the pod out of the kit and turn it upside down.
• Unscrew or lift the silicone top-fill plug on the underside of the pod.
• Tilt the e-liquid bottle into the fill port and squeeze slowly until full.
• Reseal the plug, wait two to three minutes for the coil to prime, then re-insert.
• Inhale to fire. The airflow ring on the base sets MTL or RDL tightness.

What’s in the Box

• 1 x Elf Bar ELFX Pod Kit (1000mAh, RGB LED)
• 1 x 0.6 ohm ELFX Dual Mesh Pod (RDL)
• 1 x 0.8 ohm ELFX Dual Mesh Pod (MTL)
• 1 x USB Type-C Cable
• 1 x User Manual