Description

About the Vaporesso XTank T MTL Tank

The XTank T is Vaporesso’s slim 22.4mm Vaporesso tank, also written x tank t, based around the GTX coil platform. It fits flush on the GTX One Pro and any other 22mm-plus 510 mod. Coils range from 0.4 ohm RDL down to 1.2 ohm tight MTL, so one tank covers most refillable vape styles. It belongs alongside the wider iTank T sub-ohm tank for cloud-focused vapers, while the XTank T owns the slim MTL and RDL side of the lineup.

Two coils ship in the pack: a 0.6 ohm mesh for warmer RDL or loose MTL, and a 1.2 ohm mesh for a cigarette-style draw. Pair with 10ml nic salts on the higher resistances or 50/50 e-liquids across the full coil range.

Key Features

• 22.4mm Slim Profile fits flush on compact 510 mods with no overhang
• Top Airflow Design no bottom holes means fewer pocket leaks
• SSS Leak-Resistant Seal sealed top-fill and airflow paired together
• GTX Coil Platform 0.4 to 1.2 ohm covers MTL, RDL and tight DTL
• Adjustable Airflow Ring closes right down to a cigarette draw
• 2ml TPD Top-Fill Capacity sealed silicone plug under the cap
• 510 Connection fits the GTX One Pro, Armour S and any 510 mod

Top Airflow with SSS Leak Resistance

The XTank T places its airflow inlets at the top of the tank rather than underneath, closing off the route bottom-airflow tanks leak through.

Vaporesso pairs the top-airflow path with their SSS (Sealed Silicone System) plug at the fill port. Pop the cap, refill, snap the cap back, and the silicone plug holds the e-liquid in place even if the tank rolls around in a bag. For a slim MTL tank this is the headline upgrade over older 22mm tanks.

Tight MTL Through to Loose RDL Draw

The adjustable airflow ring lets the same tank cover three vape styles depending on which coil is fitted.

Close the ring fully with the 1.2 ohm coil for a tight cigarette-style MTL pull, ideal with 20mg nic salts. Open the ring halfway with the 0.6 ohm coil for a warmer RDL draw on a 50/50 freebase. Open the ring fully with the 0.4 ohm coil for a restricted-DTL pull on a shortfill.

Coil Compatibility

The XTank T uses the full GTX coil platform shared with the GTX One Pro, Armour S and Armour Ultra Mod. The same coils carry between every GTX kit you own.

The 0.6 ohm and 1.2 ohm mesh coils come in the box. Replacement and step-up coils are stocked in the Vaporesso GTX coil 5-pack.

GTX Coil	Wattage	Style	Best E-Liquid
0.4 ohm Mesh	26-32W	RDL	Shortfill or 50/50
0.6 ohm Mesh	20-26W	RDL / MTL	50/50 or nic salt
0.8 ohm Mesh	12-16W	MTL	Nic salt 10-20mg
1.0 ohm Mesh	10-14W	MTL	Nic salt 10-20mg
1.2 ohm Mesh	8-12W	Tight MTL	Nic salt 10-20mg

Compatible Mods

• 510 thread, 22.4mm wide, fits flush on any 22mm-plus mod
• Native pairing: GTX One Pro (designed around this tank, 5-40W, extra GTX coils included)
• 18650 options: Armour Ultra Mod or Armour S for replaceable battery life
• Spare glass: XTank T glass tube, sold separately
• For bigger sub-ohm clouds, the iTank T uses the GTi coil platform instead (coils do not cross between the two)

How to Fill and Install

• Unscrew the airflow ring and lift the screw cap
• Add e-liquid down the inside wall, clear of the central airflow tube
• Reseat the cap and stand upright for 5 minutes to wick
• Screw onto a 22mm-plus 510 mod, set wattage in the coil range, prime with two short pulls
• Swap GTX coils at the base, keyed to seat one way

Specifications

Spec	Detail
Diameter	22.4mm
E-liquid capacity	2ml (TPD compliant)
Coils included	GTX 0.6 ohm + GTX 1.2 ohm
Coil platform	GTX 0.4 to 1.2 ohm
Wattage range	8 to 32W
Connection	510 thread
Fill type	Top fill, sealed silicone plug
Airflow	Adjustable top airflow
Vape style	Tight MTL, MTL, RDL
E-liquid type	Nic salts, 50/50, shortfill on the 0.4 ohm
Leak resistance	SSS top airflow and silicone fill plug
Colours	Black, Silver, Grey

What’s in the Box

• 1x Vaporesso XTank T MTL Tank
• 1x GTX 0.6 ohm Mesh Coil (20-26W)
• 1x GTX 1.2 ohm Mesh Coil (8-12W)
• 1x Straight Drip Tip
• 2x Spare O-Rings
• 1x Refilling Silicone Plug
• 1x User Manual