Description

Contains 3 coils in a pack

Mini V2 A1 (0.17ohm) – Best between 110 – 130watts
Mini V2 A2 (0.2ohm) – Best between 85 – 105watts
Mini V2 A3 (0.15ohm) – Best Between 100 – 120watts
Mini V2 S2 (0.15ohm) – Best Between 45 -60watts
Mini V2 K1 (0.2ohm) – Best Between 90 – 120watts
Mini V2 K4 (0.15ohm) – Best Between 60 – 80watts

Please prime coils correctly to avoid short life
Read below to prime coils correctly

• Drip your e-liquid on top of the coil making sure the cotton inside soaks up the liquid, keep driping liquid until holes down the side of the coil become soaked.
• Refit your coil into the tank and fill with your e-liquid.
• Leave for at least 5 minutes.
• Take a few ‘Primer Puffs’ by drawing on the tank WITHOUT pressing the fire button on your device.
• If your device has adjustable power start off low and work your way but up to your preferred power.

Please note all e-liquid brands have different levels of sweetener (sucrose) which can drastically shorten coil life.
TOP TIP!
Every now and then you tank might split and gurgle at you when you press the fire button, this means your coil has become ‘flooded’ with e-liquid. This usually happens when your device has sat for a period of time and is still soaking the coil.
If this occurs, remove your mouthpiece place a tissue over the top of opening and give your tank a good flick down, all the excess juice should find its way out and clear the gurgle and spitting.