Description

Lost Vape Thelema Solo 100 Pro

The Thelema Solo 100 Pro from Lost Vape is a 100W single battery regulated mod running the Quest X 3.0 chipset with six vaping modes, a 1.47 inch TFT colour display, and 18650 or 21700 battery support. Zinc alloy body with a PU leather panel at 150g. 510 connection fits any sub-ohm tank, RTA, or RDA. Five colours.

The upgrade from the original Thelema Solo 100, stepping up to the Quest X 3.0 chip, a larger display, BOOST mode, and the C-FRAME swappable cover system. This listing is the mod only. If you want the mod paired with a tank, the Thelema Solo 100 Pro Kit bundles everything together. If you need more power from a dual battery setup, the Thelema Q200 Pro runs the same chip at 200W from two batteries.

Key Features

• 5W to 100W output from a single 18650 or 21700 cell (sold separately)
• Quest X 3.0 chipset fast firing, stable output, six modes
• Six modes WATT, BOOST, VOLTAGE, SS316, Ti, Ni
• 1.47 inch TFT colour display with 9 customisable UI themes
• 18650 and 21700 support adapter included, up to 25A discharge
• 0.1 to 3.0 ohm resistance range
• 0.7V to 8V output voltage
• Zinc alloy body with PU leather panel
• C-FRAME battery cover swappable with other Thelema Solo covers
• USB-C charging at 5V/2A (external charger recommended)
• 5 colours to choose from
• 10-second overtime, short-circuit, overheat, and weak battery protection
• 1 year warranty

Quest X 3.0 and Vaping Modes

Six modes cover everything from straightforward wattage control through to temperature regulation for three wire types. WATT mode runs from 5 to 100W for standard use. BOOST adds a brief power spike at the start of each puff for coils that need a faster ramp-up. VOLTAGE mode lets you set output voltage directly from 0.7 to 8V. SS316, Ti, and Ni modes cap the coil temperature rather than just the power, which prevents dry hits on supported wire types. The 1.47 inch TFT display shows your settings clearly with nine UI themes to change the look.

Battery, Charging, and C-FRAME

The mod takes a single 18650 or 21700 cell with the included adapter. Running a 21700 at 100W gives noticeably better battery life and more stable output than an 18650 at the same wattage, so if you’re regularly vaping above 60W the 21700 is the one to go for. USB-C charging at 5V/2A is built in, but an external battery charger is better for long-term cell health. The C-FRAME battery cover swaps with covers from other Thelema Solo models, so you can change the look without buying a new mod. 

Lost Vape Thelema Solo 100 Pro Specifications

What’s in the Box

• 1 x Lost Vape Thelema Solo 100 Pro Box Mod
• 1 x 18650 to 21700 battery adapter
• 1 x USB-C cable
• 1 x User manual
• 1 x Warranty card

Battery is NOT included. Pick up 18650 or 21700 batteries separately.