Description

Lost Vape Thelema Solo 100 Pro Kit

The Thelema Solo 100 Pro Kit from Lost Vape pairs the 100W Thelema Solo 100 Pro mod with the Centaurus Sub Ohm V2 Tank for a full DTL setup out of the box. Quest X 3.0 chipset, six vaping modes, 18650 or 21700 battery support (adapter included), and two UB Max coils in the box. Zinc alloy body with PU leather panel. Five colours.

The upgrade from the original Thelema Solo 100 with the Quest X 3.0 chip, BOOST mode, larger TFT display, and C-FRAME swappable covers. If you already own a tank and just want the mod, the Thelema Solo 100 Pro Mod is available separately. For more power from a dual battery setup, the Thelema Q200 Pro runs the same chip at 200W.

The Thelema Solo Pro Kit pairs with shortfill e-liquids at 70% VG or above on the included sub-ohm coils.

Key Features

• 5W to 100W output from a single 18650 or 21700 (sold separately)
• Centaurus Sub Ohm V2 Tank 2ml TPD, top fill, top airflow
• 2 x UB Max coils included
• Quest X 3.0 chipset fast firing, stable output, six modes
• Six modes WATT, BOOST, VOLTAGE, SS316, Ti, Ni
• 1.47 inch TFT colour display with 9 customisable UI themes
• 18650 and 21700 support adapter included, up to 25A discharge
• 0.1 to 3.0 ohm resistance range
• Zinc alloy body with PU leather panel
• C-FRAME battery cover swappable with other Thelema Solo covers
• USB-C charging cable included (external charger recommended)
• Spare glass included
• 5 colours available
• 1 year warranty

Centaurus Sub Ohm V2 Tank and UB Max Coils

The kit ships with the Centaurus Sub Ohm V2 Tank at 28mm diameter with 2ml TPD capacity. Top fill and top airflow with coil lock protection to prevent leaks. The UB Max coil range covers three resistances:

Coil	Resistance	Wattage	Draw
UB Max V1	0.15 ohm	60-80W	Open DTL, thick vapour
UB Max V1	0.2 ohm	50-70W	DTL, balanced flavour and cloud
UB Max V2	0.3 ohm	40-60W	Tighter DTL, flavour focused

Two coils come in the box. Stock up on spare UB Max coils so you’ve always got a fresh set ready. High-VG shortfills at 70/30 or above work best across all three resistances.

Quest X 3.0 and Vaping Modes

Six modes on the mod. WATT runs from 5 to 100W for standard use. BOOST adds a brief power spike at the start of each puff for faster coil ramp-up. VOLTAGE sets output directly from 0.7 to 8V. SS316, Ti, and Ni modes cap the coil temperature rather than just the power, which prevents dry hits on supported wire types. The 1.47 inch TFT display shows your settings clearly with nine UI themes.

Battery and C-FRAME

The mod takes a single 18650 or 21700 cell with the included adapter. A 21700 gives better battery life and more stable output at higher wattages. USB-C charging at 5V/2A is built in, but an external battery charger is better for long-term cell health. The C-FRAME battery cover swaps with covers from other Thelema Solo models.

Lost Vape Thelema Solo 100 Pro Kit Specifications

Spec	Detail
Product	Lost Vape Thelema Solo 100 Pro Vape Kit
Mod Output	5W to 100W
Chipset	Quest X 3.0
Modes	WATT, BOOST, VOLTAGE, SS316, Ti, Ni
Battery	Single 18650 or 21700 (sold separately, adapter included)
Display	1.47 inch TFT colour, 9 themes
Tank	Centaurus Sub Ohm V2 (28mm, 2ml TPD)
Tank Airflow	Top airflow, adjustable
Tank Fill	Top fill with coil lock
Coils	UB Max (2 included)
Resistance	0.1 to 3.0 ohm
Charging	USB-C 5V/2A (cable included)
Body	Zinc alloy, PU leather panel
Cover	C-FRAME (swappable)
Safety	10s overtime, short-circuit, overheat, weak battery
Warranty	1 year

What’s in the Box

• 1 x Lost Vape Thelema Solo 100 Pro Mod
• 1 x Centaurus Sub Ohm V2 Tank (2ml TPD)
• 2 x UB Max coils
• 1 x 18650 to 21700 battery adapter
• 1 x USB-C cable
• 1 x Spare glass
• 1 x Spare parts pack
• 1 x User manual
• 1 x Warranty card

Battery is NOT included. Pick up 18650 or 21700 batteries and a battery charger separately.