Description

NeXlim GO Vape Kit

The OXVA NeXlim GO is a lightweight, draw-activated pod kit built around OXVA’s dual mesh coil technology and a large 1800mAh battery. It strips back the colour screen and button controls found on the original NeXlim, replacing them with a simple tri-colour LED indicator and two physical switches for airflow and mode selection. The result is one of the most straightforward pod kits available, well-suited to beginners switching from disposables or smokers trying vaping for the first time.

With ECO and Boost modes, adjustable airflow, and compatibility with three NeXlim pod resistances (0.6ohm, 0.8ohm, and 1.2ohm), it covers both mouth-to-lung and restricted direct-to-lung styles. The polycarbonate body keeps the weight down to around 64 grams without the pod, making it one of the lightest 1800mAh pod systems on the market.

OXVA NeXlim GO Key Features

• 1800mAh battery with fast USB Type-C charging
• Dual mesh coil technology
• ECO and Boost modes
• Adjustable airflow slider
• Draw-activated firing
• 2ml TPD-compliant refillable pods
• Tri-colour LED battery indicator
• Magnetic pod connection with leak-resistant build
• Compatible with 0.6ohm, 0.8ohm, and 1.2ohm NeXlim pods
• Lightweight polycarbonate body

1800mAh Battery and Fast Charging

The NeXlim GO houses an 1800mAh integrated battery, which is 300mAh larger than the original NeXlim despite the lighter body. In ECO mode, OXVA rates the battery for up to 10 days of use depending on your vaping habits. When it does need topping up, 5V/2A USB Type-C fast charging brings it back to full in roughly 45 minutes. The tri-colour LED built into the OXVA logo on the front gives you a quick visual check on remaining charge.

Dual Mesh Coil Technology

Every NeXlim cartridge contains two mesh heating elements rather than the single mesh strip found in most pod kits. In Boost mode, both meshes fire together, increasing the heating surface area for a fuller, richer flavour. In ECO mode, the meshes alternate, spreading the workload so each element lasts longer. OXVA’s Unitech 2.0 system pairs these dual meshes with five layers of cotton for rapid wicking and consistent vapour from the first fill to the last.

ECO and Boost Modes

Switching between ECO and Boost is handled by a small physical slider on the side of the kit. There are no menus or screens to navigate. Boost mode runs both mesh elements at once, delivering more vapour and stronger flavour. ECO mode fires them alternately, conserving battery and extending the life of each cartridge. It is a simple but effective way to tailor your vape without any complexity.

Adjustable Airflow

On the opposite side from the mode switch, a sliding airflow control lets you dial in your preferred draw. Fully closed gives a tight, cigarette-style pull suited to higher-nicotine salt liquids. Opening it up widens the draw for a looser, restricted lung hit. The slider has a firm action that holds its position well, so it will not shift in your pocket. Even at the tightest setting, a small pinhole remains open to prevent dry hits.

Draw-Activated Firing

The NeXlim GO is entirely draw-activated. There is no fire button and no physical power button. You simply inhale on the mouthpiece and the device fires. This makes it especially approachable for people moving away from cigarettes or disposable vapes, as the action feels natural and familiar. The auto-draw sensitivity adjusts based on your airflow setting, reducing the chance of accidental pocket firing.

2ml Refillable Pods with Side Fill

UK versions of the NeXlim GO use 2ml TPD-compliant NeXlim cartridges. Each pod has a silicone-sealed fill port on the side that you can open without removing the pod from the device. Simply pull the rubber tab, insert your e-liquid nozzle, and fill. When using a new pod for the first time, let it sit for five to ten minutes after filling to allow the cotton to fully saturate before you start vaping. This protects the coil and avoids burnt-tasting hits.

Tri-Colour Battery Indicator

Instead of a screen, the NeXlim GO uses the OXVA X logo on the front of the device as a backlit LED indicator. It shows green when the battery is above around 60%, blue in the mid range, and red when it is getting low. It lights up briefly each time you take a draw, so you always have a quick check on your remaining charge without needing to press anything.

Magnetic Pod Connection and Leak-Resistant Build

NeXlim cartridges click into the device magnetically and sit firmly with no wobble. Each pod is built with a five-layer internal structure designed to prevent leaking. The Unitech 2.0 cotton arrangement wicks efficiently to avoid flooding, and the side-fill port sits away from the airflow channel to reduce the risk of liquid seeping into places it should not be. For a refillable pod kit, the build quality here is very good.

Pod Compatibility

The NeXlim GO works with any pod from the NeXlim cartridge range. The 0.6ohm pod is best for a restricted direct-to-lung draw with slightly more vapour, working well with 50/50 or freebase liquids. The 0.8ohm pod (included in the box) is a good all-rounder for mouth-to-lung vaping with nic salts or 50/50 blends. The 1.2ohm pod delivers a tighter, more cigarette-like draw and is ideal for higher-strength nic salts. With ECO and Boost modes on top of these three resistances, you effectively get six different vaping profiles from one device.

Lightweight Polycarbonate Design

The NeXlim GO body is made from polycarbonate rather than the zinc alloy used in the original NeXlim. This brings the weight down to roughly 64 grams without the pod attached, making it noticeably lighter in the hand and more comfortable in a shirt or trouser pocket. The finish includes a pearlescent patterned section on one side and a flat colour on the other, giving each colour option its own character without being flashy.

OXVA NeXlim GO Colours

• Black Warrior
• Rose Pink
• Sahara Brown
• Silky Black
• Silky Coffee
• Silky Purple
• Space Gray
• Starry Blue

What’s in the Box

• 1 x OXVA NeXlim GO device
• 1 x NeXlim 0.8ohm cartridge (pre-installed)
• 1 x User manual

Please note that a USB Type-C charging cable is not included in the box. If you do not already have one, you will need to purchase a cable separately.