Description

Vaporesso GTX One Pro Pod Mod Kit

The Vaporesso GTX One Pro is the battery and screen upgrade to the original GTX One. The earlier kit shipped a 2000mAh integrated battery that needed daily charging for most users.

The Pro version steps that up to 3000mAh. That typically returns approximately three days of MTL vaping on the 1.2 ohm coil.

Drop to a day and a half at warmer RDL settings on the 0.6 ohm. The 0.87-inch OLED on the front is approximately 26% larger than the screen on the original GTX One.

Two GTX coils come in the box paired with the xTank T 2ml tank: a 0.6 ohm RDL coil pre-installed, with a 1.2 ohm MTL coil as a spare.

The Smart AXON chip reads whichever resistance you screw in and lands the wattage automatically. Or adjust manually from 5W up to 40W on the OLED screen.

The GTX One Pro belongs to the wider Vaporesso range, arriving as genuine UK stock with sealed TPD-compliant 2ml xTank T pods and six colour finishes from classic Black, Silver and Brown through to brighter Red, Pink and Blue.

Key Features

• 3000mAh Integrated Battery up to three days MTL per charge
• 5 to 40W Smart AXON Output auto or manual wattage control
• 2ml xTank T with SSS top-fill screw cap, leak-resistant seal
• Full Mesh Coil Range 0.4 to 1.2 ohm mesh heads
• 0.87-Inch OLED Display wattage, battery, resistance, puff count
• Adjustable Top Airflow Ring tight MTL through open RDL
• USB-C Fast Charging bottom-port quick top-up
• Six Colour Finishes Black, Silver, Brown, Red, Pink, Blue

3000mAh Battery and USB-C Fast Charging

The 3000mAh internal battery is the main upgrade over the original Vaporesso GTX One, which shipped 2000mAh. Vaping the 1.2 ohm coil at MTL wattages typically returns approximately three days between charges. At 26W on the 0.6 ohm you are looking at around a day and a half of use before the kit needs a top-up.

USB-C fast charging plugs into the bottom of the device. Pass-through vaping works while charging, so there is no downtime mid-day if you are away from a wall plug and topping up off a power bank.

40W Smart AXON Output and Modes

The Smart AXON chip behind the OLED gives two ways to set wattage. Smart Mode reads the resistance of the coil you screw in and lands the wattage in the right band automatically. Ideal for new vapers or anyone who wants to fill the tank and start without fiddling with settings.

Manual mode steps wattage in 1W increments from 5W up to 40W using the buttons under the screen. Three clicks of the fire button locks the screen so the wattage cannot drift in a pocket. Five clicks turns the kit off entirely.

xTank T 2ml Top-Fill Tank with SSS

The xTank T is a 2ml TPD-compliant tank with a top-fill screw cap. Unscrew the cap, drop the bottle nozzle in through the fill port, refill to the moulded line, then screw the cap back flush. The fill hole is wide enough for any standard nic salt or shortfill nozzle.

SSS leak-resistant tech wraps the coil in a sealed condensation housing, which keeps stray e-liquid out of the airflow path between refills. Top airflow draws air from above the liquid level rather than below it, which removes the most common MTL tank leak path entirely.

Replaceable Mesh Coil Range

The xTank T takes the full Vaporesso replaceable GTX coil range from 0.4 ohm up to 1.2 ohm. The 0.6 ohm comes pre-installed for RDL on 50/50 freebase or nic salt.

The 1.2 ohm is included as a spare, for tighter MTL on 10mg or 20mg nic salt. The wattage band moves with the coil you fit.

The wider Vaporesso coil range covers every GTX resistance as a five-pack spare. GTX coils do not fit COREX pod kits such as the XROS family or the Luxe X line, which use a separate coil platform.

0.87-Inch OLED Display

The 0.87-inch OLED screen on the front of the GTX One Pro shows current wattage, battery percentage, coil resistance, puff count and Smart Mode status at a glance. The display is approximately 26% larger than the screen on the original GTX One. That makes battery state easier to read without having to bring the kit close to your face.

Button-fired activation gives a longer expected device life than auto-draw kits. The screen-lock function holds the wattage in place if the device is in a pocket or bag.

Vaporesso GTX One Pro Specifications

Spec	Detail
Battery	3000mAh integrated
Output	5 to 40W adjustable, Smart Mode auto
Chipset	Smart AXON
Charging	USB-C fast charging, bottom port
Display	0.87-inch OLED
Tank	xTank T 2ml TPD-compliant
Fill method	Top-fill screw cap, SSS leak-resistant
Coils in kit	0.6 ohm + 1.2 ohm GTX mesh
Coil platform	Full GTX 0.4 to 1.2 ohm range
Airflow	Adjustable top airflow ring
Lock	3-click screen lock, 5-click power off
Compliance	UK TPD-compliant 2ml tank
Colours	6 finishes: Black, Silver, Brown, Red, Pink, Blue

What’s in the Box

• 1 x Vaporesso GTX One Pro device (3000mAh integrated battery)
• 1 x Vaporesso xTank T 2ml refillable pod (pre-installed)
• 1 x Vaporesso GTX 0.6 ohm mesh coil (pre-installed)
• 1 x Vaporesso GTX 1.2 ohm mesh coil (spare)
• 1 x USB-C charging cable
• 1 x User manual
• 1 x Warranty card