Description
XROS 5 Pod Vape Kit by Vaporesso
The Vaporesso XROS 5 is the everyday flagship of the XROS series, based around a 1500mAh battery, a 0.88-inch HD colour display, 5-30W adjustable output and the latest COREX 3.0 mesh pods. Two refillable pods come with the kit at 0.6 ohm and 0.8 ohm, covering looser RDL and tighter MTL straight from the box. It sits at the centre of the wider Vaporesso XROS range, with the smaller Mini and Nano models stepping down and the XROS Pro 2 stepping up.
Where the XROS 5 separates itself from the rest of the family is the combination of three power modes, full adjustable wattage, the 0.88-inch HD colour screen and 14 finishes including the Leather Edition lineup. The 1500mAh battery is approximately 50% larger than the XROS 4, holding a full day of MTL vaping on a single charge with manufacturer figures rating up to 5 days of light use. Made by Vaporesso (SMOORE) and supplied as genuine UK stock under TPD compliance.
Comparing the XROS 5 family? Our XROS range comparison lines up each kit, or look at the touchscreen XROS 5 Nano and the compact XROS 5 Mini.
Key Features
- 1500mAh Battery: approximately 50% larger than the XROS 4, full-day MTL use
- 5-30W Adjustable Wattage: three power modes across Eco, Smart and Pulse
- 0.88-inch HD Colour Display: battery, wattage, resistance, puff count, themes
- COREX 3.0 Hive Mesh Pods: 0.6 ohm and 0.8 ohm in the box, 2ml refill capacity
- Full XROS Pod Compatibility: every Vaporesso XROS pod 0.4 ohm to 1.2 ohm fits
- Adjustable Airflow Slider: tight MTL through to looser RDL on one device
- USB-C 3A Super-Charging: fast charge from flat to full in under 40 minutes
- 14 Finishes Including Leather Edition: Leather, Silk, Opal and Standard families
1500mAh Battery and 3A USB-C Super-Charging
The XROS 5 carries a 1500mAh internal battery, roughly a 50% increase on the XROS 4. Most MTL vapers should see a full day of vaping from a single charge, with light use approximately stretching that further across two days or more.
USB-C 3A super-charging brings the battery from flat to full in under 40 minutes. Together with an 80% top-up reached noticeably faster than the older 2A standard.
Battery percentage shows on the HD display so you always know where the kit stands.
0.88-inch HD Colour Display with Multiple Themes
The 0.88-inch HD screen cycles through wattage, battery percentage, pod resistance and a live puff counter, with multiple colour themes to swap between. The XROS 5 also remembers the last wattage setting for each pod resistance. The result is that swapping between the 0.6 ohm and 0.8 ohm pods does not mean resetting the kit every time.
5-30W Adjustable Wattage with Three Power Modes
The XROS 5 covers a full 5W to 30W adjustable wattage range through three dedicated power modes, accessed through the fire button. This is the spec that separates the flagship XROS 5 from the smaller Mini and Nano models, which offer more limited adjustment.
|
Mode |
What It Does |
|
Eco |
Drops output automatically to extend battery life across the day |
|
Smart |
Reads pod resistance and matches the wattage for you |
|
Pulse |
Boosts output briefly for stronger flavour and warmer vapour |
Smart mode is the easiest pick if you swap between pod resistances often, since the XROS 5 sets the wattage on its own.
Hive Mesh Refill Pods Included
Two COREX 3.0 pods come with the XROS 5, a 0.6 ohm for restricted direct-lung and a 0.8 ohm for tighter MTL. The Hive Mesh holds flavour longer than the older COREX 2.0 coils.
Particularly through the back end of the coil’s life where cheaper pods tend to drop off. Each pod holds 2ml of e-liquid under UK TPD compliance and clicks back into the chassis magnetically.
XROS Pod Range Compatibility
Every Vaporesso XROS pod ever made fits the XROS 5, including both the original COREX 2.0 pods and the newer COREX 3.0 Hive Mesh pods. Pod shell, magnetic connector and cradle are universal across the XROS family, the difference between the two generations is the coil technology inside the pod, not pod fit. COREX 3.0 reads approximately 40% richer in flavour with longer coil life, while COREX 2.0 sits a touch warmer with a wider resistance ladder spanning from 0.4 ohm right up to 1.2 ohm.
|
Resistance |
Generation |
Vaping Style |
Best E-Liquid |
|
0.4 ohm |
2.0 / 3.0 |
RDL / loose |
50/50 or 70/30 |
|
0.6 ohm |
2.0 / 3.0 |
RDL |
50/50 or 10mg salt |
|
0.8 ohm |
2.0 / 3.0 |
MTL |
Nic salts 10-20mg |
|
1.0 ohm |
2.0 / 3.0 |
Tight MTL |
20mg nic salts |
|
1.2 ohm |
2.0 / 3.0 |
Tightest MTL |
20mg nic salts |
Adjustable Airflow MTL to RDL
An airflow slider sits on the side of the chassis, taking the XROS 5 from tight MTL all the way to a looser RDL draw. Close it right down for a cigarette-style pull on 20mg nic salts, open it up for more vapour on 50/50 freebase or shortfill e-liquid.
How to Use the Vaporesso XROS 5
Getting started with the XROS 5 takes a few minutes from box to first puff.
- Charge the kit fully via USB-C before first use: approximately 35-40 minutes from flat.
- Pull the pre-installed 0.6 ohm COREX 3.0 pod out of the chassis. Lift the silicone fill plug on the side and fill with up to 2ml of e-liquid.
- Replace the plug, slot the pod back into the chassis: the magnetic connector clicks it into place. And stand the kit upright for 5 minutes to let the coil prime.
- Adjust the airflow slider on the side of the chassis to taste.
- Tap the fire button to wake the screen, set wattage between 5W and 30W or pick Smart mode to let the kit set itself. Then inhale on the mouthpiece: auto-draw and manual fire both work.
XROS 5 Colours and Leather Edition
The Vaporesso XROS 5 comes in 14 finishes across four families: Leather Edition, Silk, Opal and Standard. The limited edition Leather lineup wraps the aluminium chassis in a textured leather-style panel for a more refined hand-feel and a softer grip than the painted finishes.
Together with all four Leather variants sharing the same 1500mAh battery. COREX 3.0 pods and 0.88-inch HD screen as the rest of the XROS 5 range.
|
Finish Family |
XROS 5 Colourways |
|
Leather Edition |
Black Leather, Grey Leather, Brown Leather, Red Leather |
|
Silk |
Grey Silk, Blue Silk, Violet Silk |
|
Opal |
Opal White, Opal Pink |
|
Standard |
Cosmic Black, Lavender Purple, Coral Red, Jade Green, Carbon Stripe |
Specifications
|
Spec |
Detail |
|
Output Range |
5W to 30W adjustable |
|
Battery |
1500mAh integrated |
|
Charging |
USB-C 3A super-charging, flat to full in under 40 minutes |
|
Display |
0.88-inch HD colour |
|
Pod Capacity |
2ml refillable (TPD compliant) |
|
Pod Compatibility |
All Vaporesso XROS pods, COREX 2.0 + 3.0, 0.4 ohm to 1.2 ohm |
|
Power Modes |
Eco, Smart, Pulse |
|
Activation |
Auto-draw plus manual fire button |
|
Airflow |
Adjustable slider, MTL to RDL |
|
Material |
Aluminium alloy chassis |
|
Weight |
Approximately 65g |
|
Dimensions |
Approximately 110.5 x 24.2 x 14.1mm |
|
Vaping Style |
MTL and RDL |
|
E-Liquid |
Nic salts, 50/50 shortfills |
What’s in the Box
- 1x Vaporesso XROS 5 Device
- 1x 0.6 ohm COREX 3.0 Pod (pre-installed)
- 1x 0.8 ohm COREX 3.0 Pod
- 1x USB-C Charging Cable
- 1x User Manual





Reviews
There are no reviews yet.