Description

XROS COREX 3.0 Pods

The Vaporesso XROS COREX 3.0 pods are the newer-generation 2ml refillable pods for the entire XROS line. Based around a Hive Mesh honeycomb coil and the SSS silicone seal that arrived with the 3.0 update.

Inside each pod sits a Cumulus cotton wick around a pre-installed mesh coil. Together with the resistance set at the point of order across five options from a tight 1.2 ohm MTL through to a 0.4 ohm RDL.

The 3.0 generation sits alongside the older flat-mesh COREX 2.0 pod across the same magnetic fit, so either generation drops into any XROS kit without an adapter. The wider Vaporesso XROS pod kit range all takes this pod natively, from the original XROS through to the XROS 5 family, XROS Pro 2 and XROS 6. The COREX 3.0 sits inside Vaporesso’s wider refillable pod range at the XROS-fitment end.

Each pack contains four pods. The 0.8 ohm sits as the most-picked option for nic salt users, the 0.6 ohm covers the loose MTL to light RDL crossover. The 0.4 ohm leans toward RDL with thicker 70/30 juice on the higher-wattage XROS kits.

Key Features

• Hive Mesh Honeycomb Coil denser wicking, richer flavour intensity
• SSS Silicone Seal System triple anti-leak round the coil head
• Five Resistance Options 0.4 ohm RDL through to 1.2 ohm tight MTL
• Top-Fill Silicone Plug single hinged stopper, refills in seconds
• 2ml UK TPD-Compliant sealed pod capacity to UK regulation limit
• Full XROS Kit Fitment magnetic seat fits every XROS kit launched
• Four Pods Per Pack two to three weeks of daily use

Hive Mesh Honeycomb Coil

The COREX 3.0 pod moves away from the flat mesh pattern used on the older 2.0 generation. The honeycomb structure spreads e-liquid across a wider surface area and heats more evenly from the first puff.

This Vaporesso rates at around 40% more aroma intensity and around 30% smoother draw against the 2.0 baseline. Day-to-day that shows up as a fuller flavour ceiling on fruit and dessert juices, and a slightly cooler draw on menthol.

Cumulus cotton wraps the coil with a denser, more absorbent fibre than earlier XROS wicks. The pod stays saturated through longer sessions, and the dry, papery taste that signals end-of-life takes longer to arrive.

Five Resistance Options From RDL to Tight MTL

Each XROS COREX 3.0 pod has its coil pre-installed, so the resistance is locked in at the point of order. Match the resistance to the draw style and e-liquid that suits how the kit is being used day-to-day.

Resistance	Draw style	Wattage	Best e-liquid
0.4 ohm	RDL, cloud-leaning	20-30W	70/30 or 50/50
0.6 ohm	Loose MTL / light RDL	15-25W	50/50
0.8 ohm	Standard MTL	12-18W	Nic salt or 50/50
1.0 ohm	Tight MTL, cigarette-style	10-15W	Nic salt
1.2 ohm	Tightest MTL, longest pod life	9-12W	Nic salt

The 1.0 ohm and 1.2 ohm pair best with 10mg or 20mg nic salts and give the longest refill life. The 0.8 ohm is the everyday cross-over for nic salt users. The 0.6 ohm and 0.4 ohm reward 50/50 or 70/30 shortfills on the higher-wattage XROS kits.

COREX 2.0 vs COREX 3.0

The pin, pod shape and magnetic connector carry over from the older generation. The result is that the Hive Mesh pod drops into the same kit as the earlier flat-mesh pod with no extra adapter, and the reverse holds true. The distinction is the coil technology inside the pod, not pod fit.

Spec	COREX 2.0	COREX 3.0
Coil structure	Flat mesh	Hive Mesh honeycomb
Aroma intensity	Baseline	Approx 40% higher
Draw smoothness	Baseline	Approx 30% smoother
Wicking	Standard cotton	Cumulus cotton
Leak protection	Silicone gasket	SSS silicone seal system

The warmer, denser profile of the original mesh still has a following, and the older pods remain in stock at the same XROS-fit dimensions. Vapers who prefer that flavour profile can pick up the original flat-mesh XROS refillable pod in the same five resistance options.

Compatible XROS Kits

Every kit in the Vaporesso XROS series uses the same magnetic pod connection, so a COREX 3.0 pod clicks into any XROS kit without an adapter. The current XROS lineup all takes this 3.0 pod natively:

• Vaporesso XROS 5 Pod Kit
• Vaporesso XROS 5 Mini Pod Kit
• Vaporesso XROS 5 Nano Pod Kit
• Vaporesso XROS Pro 2 Pod Kit
• Vaporesso XROS 4 Pod Kit
• Vaporesso XROS 4 Mini Pod Kit

Legacy XROS 2, XROS Mini and original XROS also accept the COREX 3.0 pod. Those older kits cap at 16W to 18W output, so the 0.6 ohm and above resistances suit them best.

Specifications

Spec	Detail
Brand	Vaporesso
Coil generation	COREX 3.0
Coil structure	Hive Mesh honeycomb
Wicking	Cumulus cotton

What’s in the Pack

• 4 x XROS COREX 3.0 pods (resistance as selected)
• User leaflet